- Simple two-step operation
- 2.2 mm small incision
- Stable polymer by double-polymerization
- Unrivaled "made in Japan" quality
- Fine-tuned functional lens design
Please install the latest Adobe Flash Player to view the videos.
Simple two-step operation
The SZ-1C is designed for easy and quick operation using a simple two-step process for smooth advancement.
2.2 mm small incision
The SZ-1C can be used with a 2.2 mm small incision at the corneoscleral junction (a 2.4 mm incision size is required through the clear cornea).
Stable polymer by double-polymerization
Double-polymerization of monomers in the IOL decreases voids in the IOL structure resulting in a stable polymer. This unique structural architecture inhibits water components from coalescing and reduces the chances of glistening and whitening.
Unreacted monomers are eliminated to prevent structural decomposition and an increase in voids.
Unrivaled "made in Japan" quality
Pride in reliable IOL Material
All the steps from IOL design to IOL material manufacturing are performed at NIDEK without any outsourcing. NIDEK formulates original acrylate materials for IOL manufacture.
The lOLs undergo “lathe cutting” which is controlled to the NANO-level to maximize IOL quality.
Fine-tuned functional design
Anchor wing loop
The 90° haptic design enlarges the contact area with the capsular bag resulting in a stable, well-centered IOL implantation.
360° square edge
A 360° square edge protects against migration of the lens epithelial cells into the back of the optic and the haptic junction, minimizing the risk of posterior capsule opacification.
Asperitic optic side surface
Asperitic optic side surface reduces intraocular reflection and optic edge glare.
Blast finishing on the haptic surface reduces adherence to the optic surface during lens folding and improves the visibility of the haptic when the lens is loaded into the cartridge.
|Product name||Nex-Load System SP Clear|
|Loaded lens||Aspheric Single-piece IOL Aktis SP (NS-60G)|
|Diopter range||11.0 to 27.0 D (0.5 D step)|
27.0 to 30.0 D (1.0 D step)
The availability of the products differs from country to country depending on the status of approval in each country. Specifications and design are subject to change without notice.