Environment-Oriented Coating Solution
Solvent-Free Hard Coating Material

Features
- Solvent-free, UV-curing hard coating material with less impact on human health and environment
- Applicable to plastic materials (PMMA, PET etc.) with high transparency
- Good leveling to create equivalent appearance with solvent-based hard coating materials
Detailed Information
Properties
| Item | Test Condition | Results | |||
|---|---|---|---|---|---|
| PMMA 2 mm thick | PET film 100 μm thick | ||||
| Coating Thickness | – | 10 µm | 20 µm | 10 µm | 20 µm |
| Transmittance | JIS K 7361-1 (Measured with Haze Meter [NIPPON DENSHOKU, NDH5000]) | 92.2% | 92.1% | 91.6% | 91.7% |
| Haze | JIS K 7136 (Measured with Haze Meter [NIPPON DENSHOKU, NDH5000]) | 0.2% | 0.2% | 0.7% | 1.0% |
| Refractive Index | Calculated from reflectance measured with Olympus USPM-RUⅢ | 1.50-1.51 | 1.50-1.51 | 1.50-1.51 | 1.50-1.51 |
| Adhesiveness | Crosshatch tape test (3 times) | Pass | Pass | Pass | Pass |
| Pencil Hardness | JIS K5600-5-4 (750 g load) | 4H | 6H | 2H | 2H |
| Scratch Resistance | Steel wool #0000, 500 g load, 100 strokes | No scratch | No scratch | No scratch | No scratch |
| Contact Angle | θ/2 Method | 105° (water) | 105° (water) | 105° (water) | 105° (water) |
Coating method: Bar coating
Pre-baking condition: No pre-baking; setting time: 3 minutes
Curing condition : High pressure mercury lamp 80 W/cm, accumulated light 1000 mJ/cm²
*The data in the table are for reference, not guaranteed value.
Liquid Characteristics
| Item | Characteristic |
|---|---|
| Viscosity (25°C) | 60-100 mPa・s |
| Appearance | Clear light yellow |
| Solid Content | Approx. 100% |
| Stability | No change in viscosity after storage at room temperature for 3 months |
| Intended Coating Method | Spray, slit-die, flow, gravure, ink-jet |
*The data in the table are for reference, not guaranteed value.
Applications
Brochure Request
For inquiries and brochure requests, please contact the following URL.
Related Products
NOTE
The availability of products differs from country to country depending on the status of approval.
Specifications and design are subject to change without notice.













































