/SC-1600
TOP
Clear plastic film with high hardness and anti-smudge,
“Geofilm”
Plastic Film coated with Hybrid Hard Coating Material "Acier" 
Features
- Excellent scratch and abrasion resistances
- Surface finish with “Acier” as high anti-smudge hard coating material
- PET film for standard type – PMMA, PC and other kinds of film on request
Detailed Information
Properties
| Item | Test Condition | Results | |
|---|---|---|---|
| Standard Type | High-Hardness Type | ||
| Hard Coating Thickness | Calculate from reflectance measured with Olympus USPM-RUⅢ |
10 μm | 20 μm or thicker |
| Transmittance | JIS K7361-1 (Measured with Haze Meter [NIPPON DENSHOKU, NDH5000]) |
91.0% or higher | 91.0% or higher |
| Haze | JIS K7136 (Measured with Haze Meter [NIPPON DENSHOKU, NDH5000]) |
0.5% or lower | 0.5% or lower |
| Adhesiveness | Crosshatch tape test (3 times) | Pass | Pass |
| Pencil Hardness | JIS K5600-5-4 (750 g load)*1 | 4H | 6H or higher |
| Scratch Resistance | Steel wool #0000, 500 g load | No scratch (20,000 strokes) |
No scratch (10,000 strokes) |
| Steel wool #0000, 1.0 kg load | No scratch (4,000 strokes) |
No scratch (2,000 strokes) |
|
| Steel wool #0000, 1.5 kg load | No scratch (2,000 strokes) |
No scratch (1,500 strokes) |
|
| Contact Angle | θ/2 method | 105° (Water) | 105° (Water) |
| 68° (Oleic acid) | 68° (Oleic acid) | ||
Substrate: Low interference PET film with 125 μm thick (Toyobo)
Film size: 1,500 mm (Maximun width)
Rear surface: Curl correction coating
*1 Evaluate with scratch only, but not with dent
* The data in the table are for reference, not guaranteed value.
 |
 |
*Feel free to ask for adhesive application or choice of adhesives.
*All the images used are for illustrative purpose only.
Brochure Request
For inquiries and brochure requests, please contact the following URL.
NOTE
The availability of products differs from country to country depending on the status of approval.
Specifications and design are subject to change without notice.