Tinted and Aspheric Single-piece IOL
Aktis SP

Ophthalmology & Optometry Surgical & IOL Intraocular Lens

Features

・Stable polymer by double-polymerization
・Unrivaled "made in Japan" quality
・Fine-tuned functional lens design
- Anchor wing loop
- 360° square edge
- Asperitic optic side surface
- Blast finishing
・Yellow tinting for natural color perception

Inquiry about This Product Find Distributor
Detailed Information
Specifications
Related Products
Downloads

Detailed Information

Stable polymer by double-polymerization

Double-polymerization of monomers in the IOL decreases voids in the IOL structure resulting in a stable polymer. This unique structural architecture inhibits water components from coalescing and reduces the chances of glistening and whitening.
Unreacted monomers are eliminated to prevent structural decomposition and an increase in voids.

Unrivaled "made in Japan" quality

Pride in reliable IOL Material

All the steps from IOL design to IOL material manufacturing are performed at NIDEK without any outsourcing. NIDEK formulates original acrylate materials for IOL manufacture.

 

Nano-precision Processing

The lOLs undergo “lathe cutting” which is controlled to the NANO-level to maximize IOL quality.
Fine-tuned functional design

Anchor wing loop

The 90° haptic design enlarges the contact area with the capsular bag resulting in a stable, well-centered IOL implantation.

 

360° square edge

A 360° square edge protects against migration of the lens epithelial cells into the back of the optic and the haptic junction, minimizing the risk of posterior capsule opacification.

 

Asperitic optic side surface

Asperitic optic side surface reduces intraocular reflection and optic edge glare.

 

 

Blast finishing

Blast finishing on the haptic surface reduces adherence to the optic surface during lens folding and improves the visibility of the haptic when the lens is loaded into the cartridge.
Yellow tinting for natural color perception

The tinting of the Aktis SP allows the yellow color density similar to that of a young-adult crystalline lens. It aims to provide the patient with natural color perception and contrast sensitivity in mesopic conditions.

Product/model name
Nex-Acri AA 1P　Model：NS-60YG

Specifications

Optical material
Yellow tinted hydrophobic soft acrylic
Haptic material
Yellow tinted hydrophobic soft acrylic
Diopter range
1.0 to 10.0 D (1.0 D increments) , 10.0 to 27.0 D (0.5 D increments) , 27.0 to 30.0 D (1.0 D increments)

Downloads

Brochure (PDF)

NOTE

The availability of products differs from country to country depending on the status of approval.
Specifications and design are subject to change without notice.