Environment-Oriented Coating Solution
Solvent-Free Hard Coating Material

Features

  • Solvent-free, UV-curing hard coating material with less impact on human health and environment
  • Applicable to plastic materials (PMMA, PET etc.) with high transparency
  • Good leveling to create equivalent appearance with solvent-based hard coating materials

Detailed Information

Properties
Item Test Condition Results
PMMA 2 mm thick PET film 100 μm thick
Coating Thickness – 10 µm 20 µm 10 µm 20 µm
Transmittance JIS K 7361-1 (Measured with Haze Meter [NIPPON DENSHOKU, NDH5000]) 92.2% 92.1% 91.6% 91.7%
Haze JIS K 7136 (Measured with Haze Meter [NIPPON DENSHOKU, NDH5000]) 0.2% 0.2% 0.7% 1.0%
Refractive Index Calculated from reflectance measured with Olympus USPM-RUⅢ 1.50-1.51 1.50-1.51 1.50-1.51 1.50-1.51
Adhesiveness Crosshatch tape test (3 times) Pass Pass Pass Pass
Pencil Hardness JIS K5600-5-4 (750 g load) 4H 6H 2H 2H
Scratch Resistance Steel wool #0000, 500 g load, 100 strokes No scratch No scratch No scratch No scratch
Contact Angle θ/2 Method 105° (water) 105° (water) 105° (water) 105° (water)

 

Coating method: Bar coating
Pre-baking condition: No pre-baking; setting time: 3 minutes
Curing condition : High pressure mercury lamp 80 W/cm, accumulated light 1000 mJ/cm²
*The data in the table are for reference, not guaranteed value.

Liquid Characteristics
Item Characteristic
Viscosity (25°C) 60-100 mPa・s
Appearance Clear light yellow
Solid Content Approx. 100%
Stability No change in viscosity after storage at room temperature for 3 months
Intended Coating Method Spray, slit-die, flow, gravure, ink-jet

 

*The data in the table are for reference, not guaranteed value.

Applications

・Smart phone, tablet
・Cover glass, lens
・Protective film
・Floor coating, and so on

 

 

*All the images used are for illustrative purpose only.

Brochure Request

For inquiries and brochure requests, please contact the following URL.

 

https://www.nidek-intl.com/contact/

NOTE

The availability of products differs from country to country depending on the status of approval.
Specifications and design are subject to change without notice.